Parrot test clips models for test leads and test probes

	PARROT™ test clips, test leads Invention	PARROT INVENT

	Parrot Test Clips Models for multimeters, voltmeters, oscilloscopes, test probes and test leads

PARROT™ Test Leads Clips Models

are characterized by :

A) The size and shape of the body

PCX

The PCX Parrot™ Clip is suitable for multimeter probes due to:
1) the 1000 V Cat III voltage insulation according to IEC-1010-231
2) commodity to handle, point and grip on various places and devices
3) easiness to assemble, disassemble and solder to the lead
Available with tip sizes: W2, W3, and W4
PCX model are much demanded for multimeter test leads

PCM

The PCM is a mini clip, suitable for many connections like multimeter probes, jumper leads (cable with one clip at each end), oscilloscope ground, etc.
The PCM is complying to 600 V Cat II voltage insulation according to IEC-1010-231.
The PCM is easy to assemble and disassemble by inserting a screwdriver at its back and solder to the lead.
A very special application of the PCM is for the model with the W1 tip to be used as a SMD Probe and Clip
Available with tip sizes: W1, W2, and W3, voltage insulation 600 V Cat II

PCS - MB

The PCS - MB has mother (female) banana plug for connection a 4 mm (male) banana plug
The PCS - MB clip is suitable for activities where a large variety of connections are needed and different clip sizes and models are to be used.
The PCS-MB canbe uset for up to 400 V .
Available with tip sizes: W1, W2, W3 and W4

B) The size of the tip - width of the metal tip, width of the hook and diameter of the hooked rod

The metal tip of the Parrot Clips is a bras tube with an oval shape and hole, cut at a sharp angle of 45°

Tip's code	Hook's rod diameter	Hooks width	Tip's width	Devices on witch Parrot Clips can connect	Parrot Models to be used with
W1	0,37	0,9	1,1	SMD diodes, resistance, IC with distances between terminals > 0,45mm terminal with sizes from 0,3mm to 6 mm, I = 3A	PCM, PCS-MB
W2	0,64	1,5	2,4	Electronic devices transistors, resistance, diodes IC's with distances between terminals > 0,8mm terminal with sizes from 0,3mm to 6 mm, I = 10A	PCM, PCX, PCS-MB
W3	0,64	2,2	3,2	Electronic and electrotehnic devices with distances between terminals > 0,9mm and terminal sizes from 1mm up to 6mm, I = 10A	PCM, PCX, PCS-MB
W4	0,8	3,2	4,5	High current, I = 10-20 A, Electrical measurements on terminals with sizes of 1mm - 8 mm	PCX, PCS-MB

C) Connection type to the lead

1) Solder (Parrot Clips) are easy to disassemble by inserting a screwdriver at the end of the body and twisting it.
Then the lead is soldered on the metal prolongation of the tip, inside the body.
2) MB - mother banana for connection with a 4 mm banana plug Banana connection (MB) to the lead with a banana plug is available only for the PCS-MB Parrot Clip

Parrot Test Clips Models for multimeters, voltmeters, oscilloscopes, test probes and test leads